Vassoyo tray former for small shallow tray

November 6, 2018
November 6, 2018 Damien Sandoval


Designed to take one blank tray at a time and pull it down with vacuum cups from the hopper. The blank is fed under the glue guns, where glue is applied to the minor flaps of the tray. The blank travels under the ram mandrel, where it is forced down through corner folders, forming the tray. The tray is held in a compression area until the next tray enters the forming section. This tray will then be dropped onto a discharge conveyor where it will exit the machine.

EndFlex LLC.
4760 NW 128th St.
Miami, FL 33054
1 (305) 622-4070